STRIX GREASE SHC 460 NLGI 1.5

STRIX SHC Grease 460 Series

Product Description

STRIX SHC Series greases are superior performance products designed for a wide variety of applications at extremes of temperature. They combine the unique features of synthetic base fluids with those of a high quality lithium complex thickener. The wax-free nature of synthetic fluids and the low coefficient of traction, provide excellent low temperature pump ability and very low starting and running torque. These products offer the potential for energy savings and can reduce operating temperatures in the load zone of spherical roller and ball bearings. The lithium complex thickener contributes excellent adhesion, structural stability and resistance to water. The greases have a high level of chemical stability and are formulated with special additive combinations to provide excellent protection against wear, rust and corrosion, and providing operating viscosity at high and low temperatures. STRIX SHC Series greases are available in seven grades, varying in base oil viscosity from ISO VG 100 to 1500 and in NLGI grade from 2 to 00.

Features and Benefits

STRIX SHC brand of oils and greases are recognized and appreciated around the world for their innovation and outstanding performance. The STRIX SHC series symbolizes STRIX Lubricants continued commitment to using advanced technology to provide outstanding products. A key factor in the development of the STRIX SHC Series were the close contacts between our scientists and application specialists with key Original Equipment Manufacturers (OEMs) to ensure that our product offerings would provide exceptional performance in the continually evolving industrial equipment designs.

To combat high thermal exposure of the oil our product formulation scientists chose proprietary synthetic base oils for STRIX SHC Series oils because of their exceptional thermal/oxidative resistance potential. Our scientists developed a state-of-the-art lithium complex thickener technology and used specific additives to enhance the performance of each grade of the STRIX SHC Series product family. The STRIX SHC Series greases offer the following features and benefits:

Applications

Application Considerations: While STRIX SHC Series greases are compatible with most mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of the STRIX SHC Series, it should be thoroughly cleaned out to achieve the maximum performance benefits. While the STRIX SHC Series greases share many performance benefits, their applications are best described in terms of each product grade:

• STRIX SHC 100 is an antiwar and extreme pressure grease primarily recommended for higher speed applications such as electric motors, where reduced friction, low wear and long service life are required. It is an NLGI 2 Grade / ISO VG 100 grease with a synthetic base fluid. Its operating temperature range is -40º C* to 150º C.
• STRIX SHC 220 is amulet-purpose, NLGI 2 extreme pressure grease recommended for heavy-duty automotive and industrial applications. It uses an ISO VG 220 synthetic base fluid. STRIX SHC 220 has a recommended operating temperature range of -40º C* to 150º C.
• STRIX SHC 221 is a multi-purpose, extreme pressure grease recommended for heavy-duty automotive and industrial applications, particularly where centralized grease systems are utilized. It uses an ISO VG 220 synthetic base fluid. STRIX SHC 221 has a recommended operating temperature range of -40º C to 150º C.
• STRIX SHC 460 is an NLGI 1.5 Grade grease with ISO VG 460 synthetic base fluid and is an extreme pressure grease recommended for tough industrial and marine applications. It provides outstanding bearing protection under heavy loads at low-to-moderate speeds and in applications where water resistance is a critical factor. STRIX SHC 460 has demonstrated outstanding performance in steel mills, paper mills and marine applications. The recommended operating temperature range is -30º C* to 150ºC.
• STRIX SHC 1000 Special is an NLGI 2 Grade grease with ISO VG 1000 synthetic base fluid and strongly fortified with solid lubricants including 11% graphite and 1% molybdenum disulphide for maximum protection of plain or rolling element bearings operating under boundary lubrication regimes. This product is designed to extend bearing life under conditions of extremely slow speeds, sliding contacts, and high temperatures. STRIX SHC 1000 Special has a recommended operating temperature of -30°C* to 150 °C with appropriate republication intervals.
• STRIX SHC 1500 is an NLGI 1.5 Grade / ISO VG 1500 grease with a synthetic base fluid. It is intended for use in plain and rolling element bearings operating at extremely slow speeds, under heavy loads and high temperatures. STRIX SHC 1500 has a recommended operating temperature range of

-30 ºC* to 150 ºC with appropriate republication intervals. Continuous lubrication with STRIX SHC 1500 has been very effective in prolonging bearing life in a severe roll press application. STRIX SHC 1500 has also provided excellent performance in rotary kiln roller bearings and in slag transfer rail car bearings.

• STRIX SHC 007 is an NLGI 00 Grade / ISO VG 460 grease with a synthetic base fluid; it has a recommended operating temperature range of -50º C to 150 º C with appropriate republication intervals. Its primary uses are in grease filled industrial gear cases subject to high temperatures, where conventional semi fluid greases will not provide acceptable lubricant life and in non-driven heavy-duty truck trailer wheel hubs.

*Low temperature claims based on ASTM D 1478 results vs. maximum limits of 10,000 / 1000 gcm @ startup and 1 hour respectively.

Specifications and Approvals

AAR-M942, CEN EN 12081:2017, DIN 51825:2004-06 - KPF HC 2 N-30, DIN 51825:2004-06 - KP HC 1-2 N -40, DIN 51825:2004-06 - KP HC 2 N -30, DIN 51825:2004-06 - KP HC 2 N -40, DIN 51826:2005-01 - GP HC 00 K-30

Properties and Specifications

Health and Safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.strixlubricants.com

Shipping Policy

We ship in-stock orders as soon as possible. This is often the day you placed it or the day after, but there are many situations where it will take longer. P

You will be sent at least 2 emails for each order you place:

• The Order Confirmation verifies that your order is in our system. Please review the email to make sure all the information is correct. 
• The Ship Notification is to let you know that your order is ready to go. It will be picked up by the shipping company the next time they come by our building.

See further information specific to your destination:

1: If your shipping address is in the Dhaka metro City , Please select Dhaka as your address at shipping method in checkout. If you select this option, you will   your  product in next 24-48 business hours And the shipping charge is 60 TK.  . For outside Dhaka city  shipping charge 100 tk . and it will take  5 business day